10 random SKUs · before vs after

About This Wheel - POEV 160/12KAD-SG

160mm Blickle POEV light elastic rubber wheel. As a light elastic rubber replacement wheel under an institutional, hospital, or office cart where quiet rolling matters more than load capacity, as a hot-swap replacement under an existing cart frame whose previous wheel has worn through or fallen out of spec.

POEV elastic rubber vulcanised onto a polypropylene hub. The quietest rolling in the Blickle wheel-only line at the light-medium load class, with a non-marking tread that does not transfer compound to finished floor.

Solid rubber; 65 Shore A; ball bearing; 1,000 lb load capacity. -20°C to 80°C operating range. Part number POEV 160/12KAD-SG.

Ideal applications

• Hospital corridor and patient transport cart wheels, 300-500 lb dynamic, vinyl floor
• Hotel banquet, housekeeping, and room-service rig wheels, patterned vinyl
• Office service trolley and equipment dolly wheels, finished hardwood or carpet tile
• Conference centre AV and display equipment wheels, sound-controlled environment

Not the pick if the load runs past 500 lb dynamic per wheel or the rig sees daily wash-down past 158°F. Get the POTH heavier polyurethane variant for higher load class or an ALST stainless wheel for wash-down service instead.

Pairs with: the matching bearing or axle hardware in the existing cart frame; if the bracket itself needs replacement, browse the Blickle caster collection. Also in this family: other POEV diameters and load classes in the Blickle caster collection.

About This Caster - ES6X2PODD

6-inch polyolefin swivel with Delrin bearing for low rolling effort, for use under a rig that has to roll across oil-soaked shop floor or a chemical-splash zone where rubber or polyurethane would degrade.

Pemco E-line covers distribution centers, manufacturing line-side rigs, and institutional service. Polyolefin on a high-strength hub. The wheel offers chemical resistance to oil, grease, water, and mild solvents at less than half the weight of a cast iron wheel. The trade-off is harder rolling on finished floor in exchange for chemical resilience.

6" × 2" wheel; polyolefin; 70(±5) Shore D; Delrin bearing; 700 lb load capacity; 4" x 4-1/2" mount; 2-5/8" x 3" to 3" x 3-5/8" bolt pattern. Manufacturer part ES6X2PODD; CC stock code 41GH62V-01.

Ideal applications

• Chemical-line transfer carts, solvent splash zone, multi-shift
• Plating-line fixture carts, mild caustic splash
• Auto-shop and machine-shop oil-soaked floor service
• Light fabrication and maintenance dolly wheels with grease exposure

Not the pick if the rig needs polyurethane tread softness for finished-floor protection. Get MOP mold-on polyurethane for finished-floor service instead.

Pairs with: the matching ER6X2PODD rigid at the rear corners of a 4-corner cart so the rig tracks straight. Other E-line variants: the rest of the wheel codes and brake variants sit in the Pemco caster collection.

About This Wheel - ALBS 80/15K

80mm Besthane polyurethane wheel. The standard-load replacement wheel under a European OEM cart frame at the lower end of the ALB family load range, because the ALBS family is Blickle's standard-load variant in the ALB line.

Besthane polyurethane chemically bonded to a die-cast aluminium centre. The wheel offers the standard load class in the family without the reinforced hub of the ALB. Same tread, same bond, lower hub mass and lower cost for applications that fit the original spec without dynamic-load reinforcement.

Specialty urethane; 75 Shore A; ball bearing; 500 lb load capacity; -20°C to 70°C operating range; blue tread. Part number ALBS 80/15K.

Ideal applications

• Light-medium tooling fixtures at the standard Blickle load
• Light-medium distribution-centre tow-line carts, multi-shift
• General manufacturing parts trolleys at original Blickle spec
• Replacement wheels for European OEM cart frames at the original load class, 400-800 lb dynamic

Not the pick if the application sees dropped-load impact or shock service. Get the Blickle ALB reinforced variant for shock-load service.

Pairs with: the existing B-bracket or LE-bracket caster body that already holds the previous ALBS-family wheel; if the bracket itself needs replacement, browse the Blickle caster collection. Also in this family: other ALBS diameters and load classes in the Blickle caster collection.

About This Caster - ES8X2TPR

8-inch Thermoplastic rubber swivel. Under an office or institutional cart where quiet rolling and tread durability matter at light-medium load class.

Pemco E-line covers distribution centers, manufacturing line-side rigs, and institutional service. Thermoplastic rubber on the standard E-line hub. Quiet rolling at light-medium load class with tread durability that natural rubber cannot match, for office and institutional service across finished floor.

8" × 2" wheel; Thermoplastic rubber (flat tread); 90 Shore A; roller bearing. 600 lb load capacity; 4" x 4-1/2" mount; 2-5/8" x 3" to 3" x 3-5/8" bolt pattern. Manufacturer part ES8X2TPR; CC stock code 41ME82V-01.

Ideal applications

• Hospital corridor cart wheels at standard light-medium spec
• Office equipment dolly wheels, finished hardwood or carpet tile
• Display and merchandise stand wheels, retail finished floor
• Institutional supply trolley wheels, vinyl or sealed concrete, multi-shift

Not the pick if the application is heavy industrial service past 400 lb load. Get MOP mold-on polyurethane or MOR Mold-on rubber for higher load class instead.

Pairs with: the matching ER8X2TPR rigid at the rear corners of a 4-corner cart so the rig tracks straight. Also in this family: other E-line wheel codes and brake variants in the Pemco caster collection.

About This Caster - TSK 200 PT15

Revvo polyurethane swivel. Under an institutional or light industrial cart where polyurethane's floor protection and tread durability matter.

Revvo is a Colson Group brand covering general institutional and industrial caster service, rubber, polyurethane, polyolefin, metal, nylon, and phenolic wheels across the line. Polyurethane. Floor-friendly tread that protects finished concrete, vinyl, and epoxy from marking, with tread durability that natural rubber cannot match at the same load class.

8" × 8" wheel; polyurethane; 92-97 Shore A; roller bearing. 2,200 lb load capacity; 4" x 4-1/2" mount; 2-5/8" x 3" to 3" x 3-5/8" bolt pattern. Part number TSK 200 PT15.

Ideal applications

• Institutional supply tug wheels, multi-shift
• Hospital and lab equipment cart wheels, vinyl or epoxy floor
• Office equipment movers, finished hardwood or sealed concrete
• Light industrial transfer rig wheels, finished shop floor

Not the pick if the rig sees oil, grease, or solvent exposure. Get a Polyolefin variant for chemical resistance instead.

Also in this family: other Revvo variants and wheel materials in the full Caster Central catalog.

About This Caster - 7760S-5

Roll this 5-inch Faultless polyolefin rigid under a shop or maintenance cart that crosses oil-soaked floor or chemical-splash zones, for the back corners of a 4-corner build.

Faultless is a Colson Group brand covering general institutional and industrial caster service, rubber, polyurethane, polyolefin, metal, nylon, and phenolic wheels across the line. Polyolefin construction. Chemical resistance to oil, grease, water, and mild solvents at less than half the weight of a cast iron wheel, for shop and maintenance service across chemical-splash and oil-soaked floor.

5" × 1-1/4" wheel; polypropylene; 60 Shore D; plain bearing; 350 lb load capacity; 2-15/16" x 4-1/8" mount; 1-3/4" x 2-15/16" bolt pattern. Manufacturer part 7760S-5; CC stock code 31GD50G-01.

Ideal applications

• Light maintenance dolly wheels with chemical exposure
• Plating-line cart wheels, mild caustic splash
• Auto-shop and machine-shop service cart wheels, oil-soaked floor
• Light chemical-line cart wheels at standard spec

Not the pick if the rig runs across noise-sensitive environment or needs polyurethane tread softness. Get a Rubber or Polyurethane variant for finished-floor service instead.

Also in this family: other Faultless variants and wheel materials in the full Caster Central catalog.

About This Caster - 2.03354.52 MTG53

For a light-medium shop or maintenance cart that crosses oil-soaked floor or chemical-splash zones: 3-inch polyolefin 2 Series swivel.

Colson 2 Series sits at the center of the Colson line: an American-made standard-duty platform for institutional and light-industrial carts at standard load classes. The 2 Series polyolefin wheel on a Nylon hub holds up against oil, grease, and mild solvents at light-medium load, built for shop and maintenance carts in chemical-exposure service.

3" × 1-1/4" wheel; polyolefin; 70(±5) Shore D; sleeve bearing; 200 lb load capacity; 1/2"-13 UNC x 1-1/2" mount; 4" mount height. Part number 2.03354.52 MTG53.

Ideal applications

• Light fabrication shop rig wheels, grease and solvent exposure
• Light chemical-line cart wheels at standard 2 Series spec
• Light maintenance dolly wheels with chemical exposure
• Auto-shop and machine-shop service cart wheels, oil-soaked floor

The 2 Series polyolefin rolls harder than rubber or polyurethane; not the right pick for sound-sensitive service or floor protection. Performa rubber covers quiet rolling; Polyurethane covers finished-floor protection.

Other 2 Series: more wheel codes, brake variants, and ESD options in the Colson caster collection.

About This Caster - 170PM06228S80A

Mount this 6-inch Performa polyurethane swivel under a medium-duty transfer cart that has to carry near-iron-grade load across finished concrete or epoxy without scuffing the floor, because the kingpinless raceway underneath the Empire 170 will not seize when an impact or load shift puts side load through the swivel section mid-route.

This configuration adds the 80 Shore A durometer (a softer polyurethane than the standard 95 Shore A for quieter rolling at lower load).

Albion Empire 170: economical kingpinless construction at up to 1,500 lb per caster, fully heat-treated raceway, 1-year warranty, for medium-duty transfer carts. Performa polyurethane on a cast iron core. The wheel offers iron-grade load capacity with a tread that protects finished concrete and epoxy from the marking that bare cast iron leaves, at the rolling efficiency a hand-pushed rig needs across a shift.

6" × 2" wheel; polyurethane; precision ball bearing; 1,250 lb load capacity. 4" x 4-1/2" mount; 2-5/8" x 3" to 3" x 3-5/8" bolt pattern; 7-1/2" mount height. Manufacturer part 170PM06228S80A; CC stock code 45H1C62VI-02(80A).

Ideal applications

• Assembly fixture platforms, 800-1,000 lb, no scuffing tolerance
• Warehouse pick carts, 800-1,000 lb, epoxy or sealed concrete, multi-shift
• Distribution center tow-line dollies, 700-1,000 lb, polished concrete
• Manufacturing line-side carts, 800-1,000 lb, finished shop floor

Not the pick if the rig runs across noise-sensitive environment, or the floor is unfinished concrete with debris. Get CA cast iron in the same family for unfinished concrete, or MR Mold-on rubber from the Albion Empire series for noise-sensitive service.

Pairs with: the matching 170PM06228R80A rigid at the rear corners of a 4-corner cart, so the front steers and the back tracks straight. Also in this family: Rigid, Swivel with toe-lock, Swivel with face brake, Swivel with face brake and toe-lock, Swivel with cam brake, the full Empire 170 line.

About This Caster - 2.05254.445 MTG13

Pick this 5-inch Performa rubber 2 Series swivel under a light-medium institutional, hospital, or office cart where quiet rolling and floor protection matter at the 2 Series load class.

Colson's 2 Series is the platform most Colson buyers know first. American-made, standard-duty, for institutional and light-industrial service at the standard caster load classes. Performa is Colson's signature rubber, vulcanised onto a steel hub, sized to absorb floor vibration and roll quietly across finished concrete and vinyl at 2 Series institutional load.

5" × 1-1/4" wheel; Performa rubber; 65(±5) Shore A; ball bearing; 325 lb load capacity; 5/8"-11 UNC x 1-3/4" mount; 6-1/16" mount height. Manufacturer part 2.05254.445 MTG13; CC stock code 31MB50X58-03.

Ideal applications

• Light industrial transfer rigs, finished shop floor
• Hospital corridor supply carts, vinyl or sealed concrete, multi-shift
• Office service trolleys in occupied buildings, finished hardwood
• Hotel banquet and housekeeping rigs on patterned vinyl

Avoid the 2 Series Performa rubber for chemical-splash or high-temperature service (past 180°F). Polyolefin is the chemical-resistant pick; Polyurethane covers the heavier load classes.

Other 2 Series options: different wheel materials, brake mechanisms, and conductive variants sit in the Colson caster collection.

About This Caster - 470PE12501SFBB

Bolt this 12-inch polyurethane swivel with face brake under a heavy transfer cart that has to carry iron-grade load across epoxy or sealed concrete without scuffing the floor. The face brake holds the wheel against the floor when the rig has to lock in place under load, and the kingpinless raceway carries the side load when it rolls.

Empire 470 is the top of Albion's economical kingpinless line. 4,000 lb per caster, fully heat-treated raceway, and the legs welded both sides for high-load service. PE polyurethane bonded to a cast iron core carries 470-class load with a tread that protects finished concrete, vinyl composition tile, and epoxy from the marking that bare cast iron leaves.

12" × 3" wheel; polyurethane; roller bearing; 3,500 lb load capacity; 7 1/4" x 5 1/4" mount; 3-3/8" x 5-1/4" to 4-1/8" x 6-1/8" bolt pattern; 15-1/2" mount height. Manufacturer part 470PE12501SFBB; CC stock code 57HE123V03-02.

Ideal applications

• Heavy warehouse pick carts, 2,500-3,500 lb, epoxy or sealed concrete, multi-shift
• Manufacturing heavy line-side rigs, 2,500-3,500 lb, finished shop floor
• Heavy transfer rigs across distribution aisles, 2,500-3,500 lb, mixed-surface with dock plates
• Assembly fixture and tooling platforms, 2,500-3,500 lb, no scuffing tolerance
• Distribution center heavy tow-line dollies, 2,000-3,000 lb, polished concrete

Not the pick if the rig runs across noise-sensitive environment, or the floor is unfinished concrete with debris. Get MR Mold-on rubber in the same family for quieter rolling at lower load class, or CA cast iron for unfinished concrete instead.

Pairs with: the matching 470PE12501S non-brake swivel and 470PE12501R rigid at the opposing corners of a 4-corner cart that has to lock in place. Also in this family: Rigid, Swivel, or the full Albion Empire series.